Operation; Assembling The Hand Blender; Using The Hand Blender; Assembling The Chopper (If Present) - Imetec L3701 Instrucciones Para El Uso

EN
Accessory
Chopper (11)
Chopper (11)
• Insert the motor casing (2) on the stem of the hand blender (4/6) by matching the triangle
on the motor casing with the symbol of the open padlock placed on the stem [Fig. B].
• Turn the motor casing (2) anti-clockwise, matching the triangle with the symbol of the
closed padlock until you hear a "click" [Fig. C].
ATTENTION!
• Operation must not exceed 1 minute. Before repeating this cycle, let the
appliance cool down for 1 minute.
• DO NOT use the appliance with solid ingredients.
• NEVER immerse the stainless steel stem support (5) in the mixture [Fig. D].
• Place the ingredients in a container.
• Insert the plug (8) in the socket.
• Insert the stem of the hand blender (4/6) into the container until the blades (7) are fully
immersed into the mixture.
• Start the appliance by pressing the on/off button (1).

ASSEMBLING THE CHOPPER (IF PRESENT)

ATTENTION!
• DO NOT use the chopper solely with liquid ingredients.
• DO NOT insert cheese rinds as they can damage the motor.
• Chop the ingredients into small pieces.
• The appliance must not be used for more than 15 seconds. Before repeating
the cycle, let the appliance cool down for 1 minute.
• Insert the chopper blades (10) in the chopper bowl (11) [Fig. E].
• Place the ingredients in the chopper bowl (11).
• Close the chopper bowl (11) with the chopper lid (9) [Fig. F].
• Insert the motor casing (2) on the chopper lid (9) [Fig. G].
12

OPERATION

Ingredients
Raw meat
Honey and
butter

ASSEMBLING THE HAND BLENDER

USING THE HAND BLENDER

Maximum
amount
350 g
300 g + 200 g
Maximum use time
15"
5'' and 2' for the appliance
to cool