First Use - Spanset ASH 1t Borrador De Las Instrucciones

use joker hooks within a temperature range of -40°C to +200°C. When used
in combination with textile slings, the lower operating temperature of the
textile slings (e.g. PES max. 100°C) limits the range of applications.
#
Never stay in the danger zone!
$
Plan the load's fastening, lifting and lowering process with the
greatest of care before the actual lifting process. Reckless fas-
tening can damage the load or endanger employees' life and health!
3 Operating joker hooks

3.1 First use

Before first use, the user must inspect the lifting straps/belt strap hangers
for compliance with the order, completeness of accompanying documents
(e.g. declaration of conformity and manufacturer certificate) and con-
formance of the data in the accompanying documents with the product
labels. Upon first use, an authorized person must make a visual check and
document it according to DGUV rules 100-500, chapter 2.8; former BGR
500, chapter 2.8. For this, a chart can be created or an inspection card
filled out and saved. Equipping products with RFID tags and electronic do-
cumentation of commissioning, such as with IDXpert
up and simplifies the routine described.
3.2 Mounting
Joker hooks must be combined only with round slings and lifting straps of
the same load capacity. Always observe the geometries of the joker hook,
lifting strap loops and fastening points to the load (see 3.3 and 3.4).
#
Joker hooks are coloured according to DIN EN 1492 to simplify
their combination with textile slings of the same load capacity
and colour code
If the sling has already been connected to joker hooks at the factory,
mounting is not necessary!
10
.
11
(database), speeds
®
b