Daily Preventive Maintenance Checklist - Raytheon Commercial Laundry UW50PV Instalación Y Mantenimiento

Maintenance
Machine ____________________________
Operator ___________________________
Disconnect power to the washer-extractor before performing the
1.
Inspect water inlet valve hose connections on the back of the
washer-extractor for leaks.
2.
Inspect steam hose connections for leaks (where
applicable).
3.
Verify that insulation is intact on all external wires and that
all connections are secure.
4.
Check door lock and interlock before starting operation:
a.
Attempt to start the washer with door open.
b.
Close the door without locking it and attempt to start the
washer.
c.
Close and lock the door, start a cycle, and attempt to
open the door while the cycle is in progress.
5.
Inspect all water recirculation pipe connections, if
applicable.
1.
Clean the AC drive box filter.
2.
Clean the door gasket of all foreign matter.
3.
Clean automatic supply dispenser and lid.
4.
Clean the washer's top, front, and side panels.
5.
Leave loading door open at the end of each day to allow
moisture to evaporate.
6.
Clean water recirculation filter, if applicable.
Note: Unload the washer-extractor promptly after each completed cycle to prevent moisture buildup.
Note: Leave loading door open after each completed cycle to allow moisture to evaporate.
48

Daily Preventive Maintenance Checklist

Checks
Observe All Safety Warnings!
monthly maintenance procedures.
Beginning of Day
End of Day
Week Of:
________________
Days
1 2 3 4 5 6 7
F232051