Promax PROLITE-23 Manual De Instrucciones página 47

USER'S MANUAL. PROLITE-23
[6] Save on memory function ("Store").
Press this key to save the current measurement under different wavelength
categories and flashes the location number. The Prolite-23 stores 500
measurements for each wavelength.
[7] Recall from memory function ("Recall").
Press the key to enter the "Recall mode" to allow viewing, editing, and transferring
of stored measurements. Hold the key for several seconds until "HELD" displays.
Then the stored data is transferred to a PC via the RS-232 serial port (Software
provided must previously be installed in the PC).
[8] Cursors.
After pressing Recall, use the
memory. Holding
[9] Instrument power on and power off.
Power on and off the instrument. With default setting, Prolite-23 will automatically
turn off if no key is pressed for 5 minutes.
[10] Wavelength function.
Press the key to select the wavelength, which must be consistent with the
wavelength of the optic fibre to be measured.
[11] Delete function ("Clear").
Hold the Store & Recall keys down together until "HELD" displays to clear all
stored data at the currently selected wavelength
[12] External power supply led indicator.
External power supply led indicator. When the indicator is on, the instrument is
using external power supply.
06-2008
and keys to browse the stored data in the
and together can start auto zeroing.
Page 11