Snom 760 Guia De Inicio Rapido página 5

E
N snom 760 Quick Start Guide
G
L
• Do not install the device in rooms with high humidity (for example, in bathrooms,
I
laundry rooms, damp basements). Do not immerse the device in water and do not
S
spill or pour liquids of any kind onto or into the device.
H
• Do not install the device in surroundings at risk for explosions (paint shops, for
example). Do not use the device if you smell gas or other potentially explosive fumes.
• Do not use the device during thunderstorms. Lightning striking the power grid may
cause electric shocks.
• Warning: The handset contains a magnet, and its earpiece may attract small
dangerous objects such as needles or pins. Please ensure before each use that no
such objects are present.
SELV (Safety Extra Low Voltage) Compliance
Safety status of Input/Output connections comply with SELV requirements.
Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV
circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use
RJ-45 (8P8C) connectors. Use caution when connecting cables.
Standards conformance
This device complies with the essential health, safety, and environmental
requirements of all relevant European directives. The declaration of
conformity can be requested from snom (address see reverse cover).
This phone is FCC-certified and meets US health, safety, and environmental
standards.
Unauthorized opening, changing, or modifying the device will cause the
warranty to lapse and may also result in the loss of CE conformity and
the FCC certification. In case of malfunction contact authorized service
personnel, your seller, or snom.
• IEC 60950-1:2007
Safety:
• Power: PoE or power supply
00002730)
• RJ45
1 x LAN, 1 x PC:
• Ethernet: 2 x IEEE 802.3/1 Gigabit switch
• IEEE 802.3af, Class 2
Power over Ethernet:
Disposal of the device
This device is subject to European Directive 2002/96/EC and may not be
disposed of with general household garbage.
Cleaning
To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might
damage the surface or internal electronics of the device.
8
PSAC10R-050 (available separately, snom PN
Setting up and connecting the phone
See pages 2 - 3
Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on pages
2 - 3, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network does not
support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server
from your Internet service provider or your network administrator and enter them manually
when you are asked to do so on the display.
Watch the display and, when asked to, make selections with  /
.
1. Language. The default is English.
2. Time zone
3. Dial tone
4. The display shows the "Welcome" screen. Press any key to log on.
5. Enter the account number. Save with
6. Enter the registrar. Press .
7. Enter the password received from your Internet service provider or administrator.
Press . After successful registration you will see the green symbol with the
handset:
Infobar with date & time
Identity line
Identity for outgoing Active identity:
calls: Green symbol Yellow symbol
Entering numerals, letters, and special characters
Press any key or pick up handset.
Current input mode:
Next input mode:
Changing input mode:
Move cursor to the left
:
Delete character to
Move cursor to the right
:
the left of the cursor
snom 760 Quick Start Guide
and save with
.
Unregistered
identity:
Input modes:
123: Numerals
abc: Small letters
ABC: Capital letters
Redial
Directories, call lists,
contact list, favorites
E
N
G
L
I
S
H
9