Planning The Placement Of Camera & Monitor; Installation Of The Monitor - Luda Elektronik trailerCam Guia Del Usuario

6. Planning the placement of the camera & monitor
The illustration above is an example on how to mount your camera and monitor. Due to the length of
the camera power cable, the camera should be placed at a maximum of 3 meters of a suitable power
source. The power source is often the trailer light source. The monitor power cable is 2m long.
At a free line of sight the range between the camera and monitor is up to 150m. However, all machines
are different so please try out the signal quality before mounting the items permanently. You can use the
optional larger antenna with cable to shorten the transmission distance and get a better signal.
Information
The 2,4 GHz frequency signals are sent as radio waves in the air. The waves can
penetrate most objects or bounce around them. However, the signals loose strength
at every obstacle (windows, walls etc.) they need to penetrate. If penetrating metal, the
signal strength will be substantially reduced.

7. Installation of the monitor

1. Mount the monitor foot in the trailer and attach the monitor. Make sure everything is properly fitted
and steady.
2. Connect the cigarette adapter to the cigarette lighter socket (12-24V) and to the monitor's power
connection. You can also connect the monitor directly using the alternative cable.
3. Turn on the ignition to power up the monitor. If it doesn't start up automatically, press the Power
button. Since the camera is not yet installed no image will show up on the screen at this point.
4. Turn off the monitor and continue with the installation of the camera.
- 25 -
DE
EN
ES FR
FI
SV
FR
IT
PL
SV