B - The Options; Flushing System (Automatic Rinsing); Sandfilter And Self Priming Pump - Aqua-Base YK Serie Manual De Utilización

1 – FLUSHING SYSTEM (AUTOMATIC RINSING)
Allows an easy flushing of the membranes, just by switching on the flush system (42). Connecting on the network of water under pressure of
the boat.
See explanation of functioning Chapter C – 4.1.
Ref. Flushing system: 102221-82
See the On board installation YC (idem YK) with the flushing system in ANNEXES page 53.
2 – SANDFILTER AND SELF PRIMING PUMP
Fitted before the 5 micron filters, it allows prime filtration, reducing consumption of 5 micron filter cartridges. The sand filter is equipped with
only 1 valve (multi-position valve) manipulated for the cleaning, rinsing, filtration operations.
Particularly interesting when the watermaker is operating in dirty seawater (e.g. suspended sand).
A self-priming pump allows a correct feeding of the sandfilter and the unit, allowing operation above the waterline.
Ref. Sandfilter subset : 812008
See the On board installation YC with sand filter in ANNEXES page 53.
A check valve must be installed after the hull valve so that the feed system is always fills with water. (Not
supplies by SLCE).
\\Serveurslce3\dao\Etude-3d\Aquaset\0-DOSSIER TECHNIQUES\1-sw-plaisance\AQUA-BASE YK\09-Manuel utilisateur\AQUABASE YK FRUKES 2018-02-O.doc
B – THE OPTIONS
FR/UK/ES Page 23/66
VERSION 2018-02-O