Stagnoli ENERGY Manual Del Usaurio página 17

3. bistable receiver . Energy can manage the lighting of a courtesy light in a bista-
GB
ble way, via radio or via cable.
input
At receiving the signal by remote control or by input, the fi rst-channel relay chan-
ges its state (bistable function): if you deactivate it, the relay closes the contact;
if it is activated, it opens the contact. On the contrary, the second-channel relay
closes the contact for one second. In this way, the two channels work independen-
tly. The fi rst-channel output can be activated or deactivated also via cable through
the input.
4. crepuscular . Energy, through a light sensor aid, is able to fi re the sensory lights
only during the hours of dark, avoiding energy waste.
light sensor
At receiving the signal by remote control or by input, the fi rst-channel relay closes
the contact for 5 minutes, whereas the second-channel relay commutes for one
second.
Whether light is over the set threshold and LED3 is off, the fi rst-channel relay do-
esn't work. The light threshold that is necessary to activate the relay is adjustable
and can be dimmed by bonding with JUMP tinning.
Receiver fi rst and second-channels work separately and are combined with the
same control.
17
power
start
control
board
power
start
control
board
light
gate
light
gate