Overview; Mt20W Information; Adding The Mt20W To Your Engage Account - Allegion SCHLAGE MT20W Guia Del Usuario

Overview

Overview
The Schlage™ MT20W multi-technology enrollment reader is
designed to simplify the enrollment of proximity and smart credentials.
The MT20W is powered by a USB cable (via a computer's USB
port or a powered USB plug) and utilizes a Wi-Fi connection for
certain scenarios (e.g., enrolling no-tour credentials). The MT20W
is compatible with Schlage smart credentials (MIFARE Classic and
MIFARE DESFire EV1), Schlage/aptiQ mobile credentials, and most
proximity credentials up to 37-bits.
The MT20W supports no-tour (with supported locks) via Schlage
MIFARE Classic or MIFARE DESFire EV1 credentials.
The MT20W will only connect via Wi-Fi to 2.4 GHz routers. It is
not compatible with 5.0 GHz routers. The router must also have a
minimum data rate speed of 24Mbps.

MT20W Information

Adding the MT20W to Your ENGAGE Account

In order to use your MT20W enrollment reader with no-tour
functionality, you must first add it to your ENGAGE account. The
following steps will take you through this process.
1
Open up the ENGAGE application and log into your account.
2 Click "Connect" at the bottom of the screen, then click
the "+" sign at the top. This will add a new device to your
account
3
The ENGAGE app will give instructions and guide you
through the set-up process.
4
The ENGAGE mobile app will now scan for your MT20W
device. Once found, it will list the device along with the
device serial number. Double-check the serial number listed
with the serial number on the label located on the back of
4 • Schlage • MT20W Enrollment Reader User Guide