13.56 Mhz Technologies; No-Tour Instructions; Software Alliance Member Managed Systems; Engage Managed Systems - Allegion SCHLAGE MT20W Guia Del Usuario

Credential Information

13.56 MHz Technologies

ISO14443 Schlage MIFARE DESFire EV1
ISO14443 Schlage MIFARE Classic

No-Tour Instructions

Software Alliance Member Managed Systems

For a software alliance member managed electronic access system,
please reference their documentation to add no-tour credentials.

ENGAGE Managed Systems

One of the key features of a supported lock is the no-tour function.
By using the MT20W Enrollment Reader, smart credentials can be
assigned/registered to a user without visiting or gaining immediate
access to the lock. The next time the new smart credential is presented
to the supported lock, user access to the lock is updated.
1 Place the credential that needs to be assigned or changed
on top of the MT20W.
2 You will hear a short beep confirming that the credential has
been scanned.
3
You can leave the credential on the device. The LED will
stay ON green. Alternatively, you can remove the credential
and present it later to have the access data written.
4 Open the ENGAGE application and log into your account.
5
You will see the credential you just scanned is now available
in the stock list. The credential may now be assigned
access. The badge ID listed on the credential (after the
dash) is displayed in the stock list.
6 Make access changes as needed within the ENGAGE web
application.
7 Place the credential to be programmed with the access
change on the MT20W. Once a valid access change (add,
replace, etc.) occurs, the MT20W will flash green 3 times
Schlage • MT20W Enrollment Reader User Guide • 7