Cord Routing Change - Friedrich KWIKQA-Q SQ06 Instrucciones De Instalación

Cord Routing Change

Unplug unit.
Your Kühl Q unit will come with the power cord already installed and routed
to the left side of the unit.
For convenience and optimum appearance the direction of the power
cord can be changed from left to right by following the procedure below.
Select the exit location on the left or right based on proximity to the power
outlet. (See Figure 23)
STEP 1. Remove the decorative front cover. (See A thru D and Figures
24A and 24B below)
A.
Open the decorative front cover.
B.
Locate and disconnect electronic control power cable harness.
C.
Remove 4 screws attaching decorative front cover.
Save to reinstall later..
D.
Remove decorative front cover. Store in a safe place to
reinstall later. (no image).
Figure 24A
A.
Figure 24B
20
C.
Figure 23
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner's
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Unplug unit prior to performing any service.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
B.