Punkt MP 02 Manual De Instrucciones página 3

Charging the battery.
The battery may already be partially charged, but
before using the MP 02 you should charge it to 100%
(max. 2.5 hours). Plug the MP 02 charger into an
appropriate power source and then connect it to the
phone with the USB-C cable provided. (There may
be a short delay before the MP 02 indicates that it
is charging.)
When the display shows that the MP 02 is fully
charged, unplug the charger from the phone first,
then from the power outlet. To prevent cable or
socket damage, always pull the plug, never the cable,
and pull in line with the socket.
Power button
Long-press to
switch on/off;
short-press to
activate screen
04
USB-C port
Setting up the MP 02.
Press and hold the Power button to turn on the
MP 02 and follow the instructions on the screen.
These will include information about how to register
the MP 02 with Punkt.; this is required for receiving
updates to the operating system. If possible,
always update the operating system using Wi-Fi to
avoid unnecessary mobile network data use. More
information is available at punkt.ch.
Making a call.
1. Short-press the Power button to activate the
MP 02's screen and press the Punkt. button
to unlock the keypad (if required).
2. Enter a phone number and press the Call button
If you make a mistake, press the Back button
3. When finished, press the End button
For full information about how to use the MP 02, please download
the Instruction Manual from punkt.ch.
.
.
.
05