Electronic Graphic Equalizer - Aiwa AV-D55 Manual De Instrucciones

ELECTRONIC GRAPHIC
EQUALIZER
GEQ
MULTIJOG
GEQ
This unit provides the following five different equalization modes.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music
CLASSIC: Enriched sound with heavy bass and fine treble
BGM: Calm tone with suppressed bass and treble
Press the GEQ (Graphic Equalizer) button, and turn the
MULTI JOG until the desired equalization mode is displayed.
The GEQ modes are displayed cyclically as follows.
r
ROCK— PoP—
JAZZ — CLASSIC —BGM
1
~~
—M3—
M2—
Ml ~
,------- Manual mode -------~
The selected mode name is displayed for four seconds, and the
indicator appears on the Ierl side of the selected mode name.
Selected mode
To cancel the selected mode
Press the GEQ button again. "GEQ OFF" appears on the display.
To select with the remote control
Press the GEQ button repeatedly until the desired equalization
mode is displayed.
Five preset modes, the manual modes Ml to M4 and "GEQ OFF
can be selected.
SETTING NEW EQUALIZATION CURVES
Up to 4 equalization curves can be stored as the manual modes
Ml to M4.
1
2
3
4
5
6
7
1 3,6
2 1,5,7
Press
the GEQ button and press the
ENTER
button within 4 seconds.
Press the DOWN or UP button to select a
frequency,
The level indicator of the selected frequency flashes.
Turn the MULTI JOG to adjust the level of the
selected frequency.
Repeat steps 2 and 3 to make the desired
equalization curve.
In steps 2 and 3, the unit returns to normal mode when no
operation is made for about 8 seconds.
Within 8 seconds, press the ENTER button.
"GEQ Ml" appears on the display.
Turn the MULTI JOG to select a preset number
from Ml to M4.
Press the ENTER button.
The equalization curve is stored.
The selected preset number and the equalization curve are
displayed for a few seconds for each.
To adjust the GEQ curve temporarily
Follow the steps from 1 to 4 above. The adjusted GEQ curve
still remains before changing or canceling the GEQ mode.
To select the manual preset curve
Press the GEQ button, and turn the MULTI JOG until the desired
manual preset number is displayed.
The GEQ system is automatically canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1 CH function is selected
The GEQ system cannot be turned on while the 5.1 CH
function is selected.
9
ENGLISH