Parts And Accessories - White Rodgers 36H Serie Manual Del Usuario

SPECIFICATIONS

Parts and Accessories:

Natural to Regulated LP Gas Conversion Kits, regulation range 5" to 12" W.C.:
• 92-0659 included with single stage models or F92-0659 available separately
• 92-1008 included with two-stage models or F92-1008 available separately
• Two 92-0659 kits may be used for two-stage valve
• Pilot fitting 0092-080800 included or F69-0727 available separately
UPRIGHT
INLET 3/4" - 14 NPT
or 1/2" - 14 NPT
.03
1.13
INLET PRESSURE TAP
1/8" - 27 NPT
Note: All dimensions indicated in inches
2
MOUNTING POSITIONS:
Upright, or 0° to 90° from upright
"
3/16 GROUND
TERMINAL
ON/OFF SWITCH
TERMINAL – M (MAIN)
TERMINAL –
P (PILOT/REDUNDANT)
Figure 1. Gas Valve Mounting Positions
TERMINAL – C (COMMON)
4.20 R
SWING RADIUS
3.77
1.375
1.20
1.63
1.375
3.26
Figure 2. Valve Dimensions and Features
LEFT or RIGHT
3.98 INLET TO
OUTLET
TERMINAL – HI (2ND STAGE COIL)
PILOT GAS OUTLET
PLUG OR FITTING
CENTERLINE OF
INLET & OUTLET
INLET BOSS
VERTICAL
360˚
REGULATOR COVER SCREWS
(REG. ADJ. BENEATH THESE
SCREWS)
PILOT ADJUSTMENT
COVER SCREW
(PILOT ADJ. BENEATH
THIS SCREW)
1.63 .32
OUTLET 3/4" - 14 NPT
OUTLET PRESSURE TAP
1/8" - 27 NPT
VENT PLUG
1/8"-27 NPT
.88
1.45
.19