EN
CLEANING AND MAINTENANCE
Replacing the cartridge
1. Shut off the water supply to the
faucet.
2. Turn on the faucet briefly to relieve
any pressure inside the faucet.
3. Move the faucet handle to the "OFF"
position.
4. Remove handle set screw cover from
the handle assembly.
5. Remove the set screw from the
handle assembly using a 2.5 mm hex
key.
6. Pull the lever handle A and cartridge
cap B from the faucet body.
7. Unscrew the cartridge lock nut C.
8. Lift ceramic disc cartridge D from
the body and repalce it with a new one.
Ensure the two lugs on bottom of the
cartridge sit properly in the allocated
holes at the base of the body.
9. Re-assemble faucet in reverse order.
10. Test for leakage.
General maintenance
Clean aerator periodically for any
buildup.
Do not use harsh detergents, solvents,
chemical agents, metallic sponges,
etc. that could harm the surface and
damage the finish. Clean only with a soft
sponge and soapy water.
Do not store chemicals or cleaning
agents in the immediate vicinity of the
faucet and connection hoses. Chemical
vapors could cause damage.
Spare/replacement list
A
F4701*
Handle Assembly
B
F4702*
Cartridge Cap
C
F4703
Lock Nut
D
F4704
Cartridge Assembly
E
F4705
Spout Bushing Kit
F
F4706
Pull Out Hose
G
F4712*
Spray Head Assy
H
F4707
Check Valve
J
F4402
Inner Aerator
K
F4312
Aerator Key
L
F4708
Quick Connect Fitting
M
F4709
Adjustible Weight
N
F4710
Fixing Kit
P
F4711
Mounting Kit
* Must Specify Finish
F
H
G
J
K
L
M
– 6 –
30 mm
106 in-lbs
E
D
C
B
A
2,5 mm
P
N