Craftsman 536.882650 Manual Del Usuario página 10

Ignition
Electric
Speed Shifter Lever
Remote Chute Contrei
Auger Drive
Button
Drive Lever
arge
Chute
Control
Auger
Height Adit
:r Bolt
Auger Drive Lever - Starts and stops the
auger and impeller (snow gathering and
throwing),
Traction Drive Lever - Propels the snow
thrower forward and in reverse
Headlight - Turns on whenever engine is
running,
Speed Shifter Lever - Selects the speed of
snow thrower (6 speeds forward and 2
speeds reverse)
Crank Assembly - Changes the direction of
snow throwing through the discharge chute,
Chute Deflector - Changes the distance
the snow is thrown
Discharge Chute - Changes the direction
the snow is thrown,
Choke Control - Used to start a cold en-
gine,
Height Adjust Skids - Adjusts the ground
clearance of the auger housing,
Ignition Key - Must be inserted to start the
engine
Primer Button - Injects fuei directly into the
carburetor mani!old for fast starts in cold
weather,
Recoil Starter Handle - Starts the engine
manually,
Throltte Control- Controls the engine
speed,
Electric Starter Button - Used to start the
engine using the 120 V electric starter,
Remote Chute Controt Lever- Push for-
ward to discharge snow high and far, Pull
remote lever back to discharge snow down
Shear Bolts - Are special bolts that are de-
signed to break (to protect the
machine) if an object becomes lodged in
the auger housing Use of a harder bolt will
destroy the protection provided by the shear
bolt.
Z_ CAUTION: Read owner's manual before operating machine Never direct discharge
toward bystanders Release the auger control bar and stop the engine before unclog-
ging discharge chute or auger housing and before leaving the machine,