Edesa L836 Manual De Instalacion Y Uso página 84

WASH PROGRAMME PHASES AND POWER CUTS
5
When the programme is running, the phase
the programme is at will appear on the display
together.
The active phases will appear successively at
the pilot as the programme progresses: the
wash, rinse and end.
Any option button can be selected provided
the wash phase in which it takes effect has
not been passed and when the programme
accepts the option.
Pressing the start/pause button during the
wash activates the PAUSE function.
If there is a power cut, when the electricity
comes back on the washing machine will
continue to run from where it left off (it has
several hours of memory). The same will
happen if the ON/OFF button is pressed.
warnings
Level the washing machine by adjusting the
feet to reduce the noise caused by spin-drying.
Try and wash clothes of different sizes in
the same wash programme to favour the
distribution of the clothes inside the drum
during spin-drying.
using the appliance and practical tips
PROGRAMME
PHASES
POWER CUTS
that prevents spin-drying from being carried out if the
distribution of the clothes inside the drum is too
concentrated. This prevents the appliance from vibrating
too much.
If you find that the clothes are not properly wrung out,
try spin-drying them again after having distributed the
clothes more evenly in the drum.
If you change the wash programme during
the wash using the selector, the PAUSE
function is activated and the programme is
cancelled.
If you need to add or remove a garment, press
the start/pause button and make sure that
the water level is not above the door overflow
level and that the temperature inside is not
high. Press the start/pause button again to
restart the wash from the same cycle phase
it had stopped at.
All the models have a safety system for spin-drying
84