Important Safety Information - Corsair SF Serie Manual De Instrucciones

SF SERIES
™
Zero RPM mode
Zero RPM mode allows the fan to remain off during low to medium
loads. This technology uses various temperatures from inside the PSU
and the power output level to determine when active cooling is needed
for the PSU. When you're pushing it hard the fan will turn itself on to
ensure that it gets the cooling it needs without any extra noise. For
the specific fan profile of your unit please refer to the specifications
section of that PSU.
11

Important safety information

CAUTION ELECTRIC SHOCK HAZARD!
. Install in accordance with all manufacturer instructions and safety
1
warnings. Failure to do so may result in damage to your power
supply or system, and may cause serious injury or death.
2. High voltages are present in the power supply. Do not open the
power supply case or attempt to repair the power supply; there are
no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or
high humidity environments.
5. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area
of the power supply.
7. Do not modify the cables and/or connectors included with this
power supply.
8. If this power supply uses modular cables, use only manufacturer
supplied cables. Other cables might not be compatible and could
cause serious damage to your system and power supply.
9. The 24-pin main power connector has a detachable 4-pin
connector. This 4-pin connector is not a P4 or ATX 12V
connector. Do not force this cable in the P4 or ATX +12V socket
on the motherboard.
10. Failure to comply with any manufacturer instructions and/or any
of these safety instructions will immediately void all warranties
and guarantees.
SF SERIES
12
™