Important Safety Information - Corsair PROFESSIONAL GOLD Serie Manual Del Usuario

2. Follow the directions in your chassis manual and install the power supply with
the screws provided.
3. Connect the main 24-pin power cable to the power supply, and then to the
motherboard. The main 24-pin power cable has a detachable 4-pin mechanism
in order to support either a 24-pin or a 20-pin socket on the motherboard.
a. If your motherboard has a 24-pin socket, you may connect the 24-pin main
power cable from the power supply directly to your motherboard.
b. If your motherboard has a 20-pin socket, you must detach the four-pin cable
from the 24-pin connector, and then plug the 20-pin cable onto your
motherboard without connecting the four-pin connector.
4. Connect the eight-pin +12V (EPS12V) cable to the power supply, and then to
the motherboard.
a. If your motherboard has an eight-pin +12V socket, connect the eight-pin
cable directly to your motherboard.
b. If your motherboard has a four-pin socket, detach the four-pin from
the eight-pin cable, and then plug this four-pin cable directly to
your motherboard.
wARNING: The detachable four-pin from the 24-pin main connector is not a "P4"
or "+12V" connector. Serious damage can be caused if you use it in place of a "P4"
or "+12V" connector.
5. Connect the peripheral cables, PCI-Express cables, and SATA cables.
a. Connect the peripherals cables to your hard drive and CD-ROM/DVD-ROM
power sockets.
b. Connect the SATA cables to your SATA SSD or hard drive's power sockets.
c. Connect the PCI-Express cables to the power sockets of your PCI-Express
video cards if required
d. Connect the peripheral cables to any peripherals requiring a small
4-pin connector.
e. Make sure all the cables are tightly connected. Be sure to save any unused
modular cables for future component additions.
6. Connect the AC power cord to the power supply and turn it on by pushing the
switch to the ON position (marked with "I").
Congratulations! You have completed installation of your new Corsair Professional
Series Gold power supply and your system is ready to go!

Important safety information

Caution electric shock hazard!
1. Install in accordance with all manufacturer instructions and safety warnings.
Failure to do so may result in damage to your power supply or system, and may
cause serious injury or death.
2. High voltages are present in the power supply. Do not open the power
supply case or attempt to repair the power supply; there are no
user-serviceable components.
3. This product is designed for indoor use only.
PROFESSIONAL SERIES GOLD
9