Turn The Power Switch On; How To Control Your Model - Carson 1st Go-Kart RTR Instrucciones

Ocultar thumbs Ver también para 1st Go-Kart RTR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

g. Turn the Power Switch on
GB
Pull the transmitter antenna out completely.
The range of the remote control is reduced if the antenna is not
pulled out completely.
CAUTION!
Always turn the transmitter´s power switch ON first!
Switch on the receiver
• Power switch is on the radio box.
• Fix the receiver antenna and wire (see page 75).
• Put the body on and fix it with the body split pins.
h. How to Control your Model
• Raise the tyres off the ground.
• Turn the steering wheel to the right and left as far as it will
go. The wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the
servo Reverse switch (ST in position REV).
• To regulate the driving speed, actuate the throttle/brake
- backwards (forward driving, accelerating) or
- forwards (braking, reversing).
10
CARSON 1st Go-Kart RTR 50 010 3016
Neutral
Left
ON
Right

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

50 010 3016

Tabla de contenido