Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER MAINTENANCE
This item is equipped with a washable and easy to clean, static filter. Regular cleaning
and maintenance of your filter should ensure a lifetime of trouble-free use.
Step1: Turn off heater.
Step 2: Locate the filter at the rear of the heater.
Step 3: Remove the top two screws as shown below. Pull the upper part of the filter up
and take out. Clean off any dust or debris.
Step 4: Rinse filter by spraying warm tap water through the rear side of the filter
(opposite of the air intake direction) until it is clean and free of dust and debris.
If the filter is extremely dirty or clogged with grease, soak the filter in a mild
solution of dish soap and water. Brush with a soft brush and repeat rinsing
process.
Step 5: Shake filter to remove excess water and lay on clean cloth or paper towels to dry.
Do not use heat source to dry filter.
Step 6: Replace filter onto heater ONLY after it is completely dry.
Step 7: Reinstalled the filter on the rear of the heater and secure with the 2 screws.
warnInG: neVer operate heater wIthoUt fIlter In plaCe. wIthoUt the fIlter In
plaCe, dUSt Can aCCUMUlate on the Infrared heater CaUSInG daMaGe.
STORAgE
when the heater is not in use, the heater shall be stored in a dry location, away from
possible damage. The power cord should be stored properly to avoid contact with hot or
sharp objects.
REPLACEMENT PARTS
IteM
wheels
wARRANTY
Every infrared heater heater is tested before it leaves the factory and it is guaranteed
for one year. If the unit should fail to operate correctly within one year from the date of
purchase, please go to our website www.qualitycraft.com and click on customer support.
we will, at our discretion, either repair or replace the unit. It will have to be returned to us
freight prepaid and we will return the repaired or replaced unit to you freight prepaid. The
company's sole obligation is to repair or replace the unit.
warranty ClaIM proCedUre
If a claimable defect occurs, please fill out a claim form through our website at
www.qualitycraft.com and click on customer support.
Before you make your claim, please make sure you have:
1. The description of the infrared heater
2. Proof of sale
3. Details regarding the defect
4. Name and address of the owner
Claims must be filled out in writing and returned within six (6) months of appearance
of defect. Failure to comply with this stipulation will make the warranty null and void.
we reserve the right to a thirty-day (30) delay following receipt of claim in which to inspect
the product. we assume no responsibility for labor costs, removing/replacing
a previously installed product, transportation, or return of the product.
Imported by
quality Craft
Laval, Quebec, Canada H7C 0A5
1-800-459-4409
(Monday to Friday, 8:30am to 5:00pm, EST)
www.qualitycraft.com
Made in China
3
part #
ND28-wHL#1
qty
4
Publicidad
