Glomex weBBoat 4G Plus Manual Del Usuario E Instalación página 74

weBBoat 4G Plus
Disable roaming: enables and disables roaming based on your needs.
NOTE: Data roaming charges may be high so check the rate plan in use with
your carrier.
Use 4G network only: set 4G as the preferred connection; if only 2G/3G
networks are in the area, the system will not connect to the data network.
Primary SIM used selection: To select the SIM to use for navigating the web
through the mobile network.
Autoswitch mode or mobile network forcing selection: to select the
autoswitch mode (automatic switching between mobile network and Wi-Fi
network, if present and properly configured) or to force the mobile
connection only. If autoswitch is selected, the Wi-Fi networks available will
be scanned.
Wi-Fi network connection status: displays the status of the weBBoat 4G Plus
connection with the external Wi-Fi network.
Signal level: Signal level of the external Wi-Fi network being used (min. 1 / max.
5).
SSID: name of the external Wi-Fi network being used.
Signal quality: displays the quality of the external Wi-Fi signal being used.
Wi-Fi Scan: scanning of the Wi-Fi networks available.
NOTE: The Wi-Fi scan button appears only if Autoswitch mode has been
selected. To scan, the autoswitch mode has to be selected.
The Wi-Fi networks available will be displayed (Fig. 25).
A padlock if encrypted and the signal quality will be displayed for each Wi-Fi
network.
Select the Wi-Fi network you want. If encrypted, the password will be
requested. Enter it and press OK in the iOS version or Save in the Android
version (Fig. 26).
74