Lanaform Dehumidifier Manual Del Usuario página 4

CONTROL PANEL
EN
10. On/Off key.
11. Mode key: use to program the dehumidifier or purify the air.
12. Timer key: use to program the automatic start up or shutdown of the appliance.
13. Humidity key: use to select the preferred humidity level if the appliance is running in dehumidifier mode or fan speed
if the appliance is running in purification mode.
14. Drying key: use to clean the appliance after an extended period without use.
15. Swing key: use to direct ventilation for the air vent.
16. Ionizer key: use to activate the ionization function.
15
LCD SCREEN
17. Auto: indicates that the dehumidifier is in
automatic mode.
18. High (dehumidifier): Indicates that the
dehumidifier is in manual mode and set to a high
level.
19. Low (dehumidifier): Indicates that the
dehumidifier is in manual mode and set to a low
level.
20. Air purification: Indicates that the appliance is
running in air purification mode.
21. Water tank: Indicates that the water tank is full.
22. Temperature alarm: Indicates that the appliance is located in a room with an ambient temperature of between 5° and
15°. If the icon flashes, the temperature of the room is less than 5° and the dehumidifier program cannot run.
23. Drying: Indicates that the appliance is in self-cleaning mode.
24. Blocking of the control panel: Indicates that the control panel of the dehumidifier is locked.
25. Humidity level indicator: Indicates the level of humidity in the room.
26. Temperature/time indicator: Indicates room temperature or the duration before the appliance starts/stops
INSTALLATION
• Check that the water tank is empty before using the dehumidifier.
• To save energy and improve performance, close all doors and windows when the dehumidifier is on.
4
14 13 12
16
11 10
17 18
21 25 22
19 20
23 26 24