Technical Specifications - Orbis ASTRO SAT Instrucciones De Empleo

- AUTO. Automatically performs the time changes on the last Sundays in
March and October.
- MANUAL. For selecting the month, day and time for Summer/Winter time
changes time.
- DEACT. No time change.
o HOLIDAYS. This is employed to choose a date period (day/month) on which
the unit will be deactivated (switched off). This period will repeated year by
year and begin to count from the 00:00:00 hours of the start day until the
23:59:59 hours of the end day.
- DEACT. No holiday adjustment.
- EDIT. Configure the start day and the end day of the holiday lapse.
o KEYBOARD. Menu to activate or deactivate the keyboard blocking protection
to prevent unwanted access.
- BLOCK: NO. Protection is disabled.
- BLOCK: YES. Protection is enabled. This protection is automatically
activated 10 seconds after entering back into MAIN screen mode. If
keyboard is pressed, message KEYBOARD BLOCKED is displayed. At
this point, in order to grant access and clears the protection, next
keyboard sequence must be pressed: C ▼ ▲ C √ √.
If a wrong sequence is pressed, message KEYBOARD ERROR will be
displayed during several seconds. If correct sequence is pressed,
NORMAL mode will be displayed and the device will be unprotected for 10
seconds. During this lapse, access to MENU functions is granted by
pressing √.
o COUNTER. Menu indicating the ON-time in hours for each circuit.
- DELETE C1. Resets channel 1 counter
- DELETE C2. Resets channel 2 counter
o INFRARED. For downloading data via the remote control. (See the section
DATA-DOWNLOADING WITH THE REMOTE CONTROL)
o CONTRAST. The menu that is used to set display contrast.
- MINIMUM, LOW, MEDIUM, HIGH, or MAXIMUM.
When a key is pressed, contrast will change to maximum contrast for three
seconds. If, at the end of this time, no key has been pressed, the contrast
level will return to its previous level.
The display is always at maximum level during programming.
o VERSION. This indicates the installed software version.
If operations are programmed that coincide in time, it must be taken into account
that some take priority over others. The priority order is as follows:
OFF MODE PERMANENT MODE
.... PROG_70
MANUAL OPERATION
The status of the circuits may be temporarily activated or deactivated when in
NORMAL mode by pressing the▼ C1 and ▲ C2 keys. The symbol
on the screen until a programmed automatic operation takes place.
To verify channel status, the
information appears.
RESET
Pressing the four keys at the same time until RESTRING appears on the display
will delete all existing programming and the LANGUAGE MENU operating mode
will be entered. The unit must be switched on in order to execute RESET.
BATTERY REPLACEMENT
The unit has an operational 4-year backup using a replaceable lithium battery.
Replacement of the battery is carried out by withdrawing the rotating button located
on the right side of the unit. When the battery is exhausted and the device is not
powered up "REPLACE BATTERY" is shown on the screen.
NOTE: When changing the battery the unit programming is not lost, however the
current time is lost. So we have to carry out the TIME SETTING again by means of
the CLOCK menu.
The battery cover is opened by rotating it counter-clockwise (marked by an arrow)
with a coin or other flat object inserted into its slot, until the cover index coincides
with the open position on the unit. After replacing the battery, the cover is inserted
by placing it in the same position with the cover index coinciding with the open
position on the unit and then turning it clockwise until the cover index coincides
with the closed position on the unit.
SWITCH THE UNIT OFF WHEN REPLACING THE BATTERY
DATA-DOWNLOADING WITH THE REMOTE CONTROL
Whenever the ASTRO SAT is SWITCHED ON, it can be programmed using an
infrared remote control. The DATA and GPS SAT remote controls are suitable for
the ASTRO SAT.
These remote controls can be used to upload and download the complete
equipment configuration, including: entire calendar, brightness, zone (country, city,
latitude, longitude or GPS coordinates and programming. In the case of GPS
coordinates, these can only be downloaded if the remote control is fitted with an
integrated GPS SAT locator.
The equipment configuration can be read from the remote control. This
configuration consists of the following:
- Dates and times for Summer/Winter time changes.
- Currently selected zone (country and city), together with astronomic
corrections.
- Currently selected backlight intensity.
- Language.
- Programs.
- Keyboard blocking selection.
- Holidays (start and end dates).
This control can also be used to download the entire configuration or only the
current zone, date and time.
MANUAL PROG_01
key (INFO) should be pressed until the desired
If the control is the GPS SAT model, a zone can be configured in function of the
GPS coordinates captured using the control.
Infrared remote control access can be achieved in three different ways:
1) In normal mode, the ASTRO SAT detects infrared communication from a control
positioned in front and pressing MENU will cause the text "INFRARED PRESS
MENU" to appear on the screen. Communications with the remote control can
now take place.
2) In normal mode, pressing the MENU key for more than three seconds will
display the text "INFRARED WAITING. Pressing MENU will provide access to
this function.
3) Pressing MENU in normal mode will enter menu selection. The ▼ and ▲ keys
are used to select MENU SETTINGS and MENU is pressed again to enter this
option. The ▼ and ▲ keys are used to select INFRARED option and this is
entered by pressing MENU. Entering this menu will display "INFRARED
WAITING" and communications are now available with the remote control.

TECHNICAL SPECIFICATIONS

Voltage rating
Tolerance
Breaking power:
Recommended maximum loads (N.O):
Self consumption
Contact
Display
Operational precision
Precision variation with temperature ± 0.15 s / ºC / 24 h
Standby power
Operation type
Software class and structure
Memory locations
Number of channels
Operating types
Astronomic adjustments
Operating accuracy
PROG_02
Operating temperature
Transport and storage temperature
Contamination situation
Protection degree
Protection class
will appear
Transient pulse voltage
Ball test temperature
Keypad accesses cover
Connection
Battery
Casing dimensions
OUTSIDE DIMENSIONS
WARNING:
This time switch incorporates a battery, the contents of which may be hazardous to
the environment. The unit must not be discarded without taking the precaution to
remove the battery and deposit it in a suitable container for recycling or returning it
to the manufacturer.
03/06.2012
As indicated on the equipment
± 10%
µ 2x16 (10) A / 250 Vac
Incandescent lamps
Fluorescent lamps
Low-voltage halogen lamps
Halogen lamps (230 Vac)
Low-consumption lamps (CFL)
Low-consumption lamps (Downlights)
LED lamps
Maximum 4.5 VA Inductive (1.8 W)
AgSnO
Backlit liquid crystal
± 1 s / day at 23 ºC
4 years (without mains supply connection)
1S, 1T, 1U
Class A
70
2
SUNRISE, SUNSET, FIXED TIME: ON/OFF
daily
± 1 second
-10 ºC to +45 ºC
-20 ºC a +60 ºC
2
IP 20 according to EN60529
II according for correct installation
2.5 kV
+ 83 ºC for 21.2.5
Sealable
By hole terminals for wires of maximum 4
2
mm
½ AA – 3,6 V – 1000 mAh – Li/SOCi
2 DIN modules (35 mm)
65
60
ORBIS TECNOLOGÍA ELÉCTRICA S.A.
Lérida, 61
Tel.: + 34 91 567 22 77
E-mail:
3000 W
1200 VA
2000 VA
3000 W
600 VA
400 VA
600 VA
switched
2
section
2
35
A016.26.55612
E-28020 MADRID
Fax + 34 91 571 40 06
info@orbis.es
http://www.orbis.es