Before You Begin - Tivoli Audio PAL BT Manual Del Usuario

• Reorient or relocate the receiving antennas.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
16.
Operate this product only from the type of power source indicated on the back panel. For
products using an external power supply, use an exact replacement if lost or damaged. For
products operating from battery power, refer to the user manual.
17.
Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to water or rain.
d. If the product does not operate normally by following the operating instructions.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinctive change in performance.
18.
Keep this product a safe distance away from naked flame, such as a lit candle.
19.
Do not expose this product to splashing or dripping. Objects containing liquid, such as
vases or drinking glasses, should not be placed on top of this product.
20.
The recommended operating temperature range is 41˚ F to 104˚ F (5˚ C to 40˚ C).
21.
Canada complies with RSS210, ICES-003.
22.
The power adapter serves as the disconnect device and should remain readily accessible.
This product can be recycled. Products bearing this symbol must NOT be
thrown away with normal household waste. At the end of the product's life,
take it to a collection point designated for recycling of electrical and electronic
devices. Find out more about return and collection points through your local
authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive
was implemented to dramatically reduce the amount of waste going to
landfills, thereby reducing the environmental impact on the planet and on
human health. Please act responsibly by recycling used products. If this
product is still useable, consider giving it away or selling it.

BEForE you BEgIN:

For your safety, the PAL BT is shipped from the factory with discharged batteries. However,
it is normal if the PAL BT plays straight out of the box. With the unit off, connect the power
supply to the PAL BT and plug it into a wall outlet to charge the batteries. (See "Fast Charge
Mode"). Like many rechargeable devices, there may be a delay before the LED starts to
blink when the PAL BT is brand new and first plugged in, or when left unused for several
weeks. This is a feature of the Power Management System designed to protect the bat-
teries from damage.
Bear in mind it may take up to 4 charge/discharge cycles before the batteries are operating
at full capacity when the PAL BT is new or has been unused for several weeks. Leaving the
PAL BT plugged in even when not in use ensures the batteries will be charged when you
need it. If the PAL BT is not plugged in, the batteries will gradually self-discharge as a safety
measure. There is also no harm in playing the PAL BT continuously while plugged in.
3 – ENGLISH