Master Lock NightWatch DEADBOLTS Guia Del Usuario página 9

Deleting All Codes
If for any reason you want to remove all codes here's how you do it.
Press the "Program" button until the keypad on the exterior of the
door begins to flash blue. When it flashes blue you can release the
button.
Enter your personal administrative code...
7-8
Push the
press .
Enter
Re-enter your administrative code and again press
• If the keypad lights in green all codes have been deleted.
• If it lights red the deletions weren't confirmed and you'll need
to repeat the steps again.
Deactivate / Reactivate All Codes
You can also deactivate all of your stored codes for a period of time
and then reactivate them.
<W LMIK\Q^I\M ITT KWLM[°
Press the "Program" button until the keypad on the exterior of the
door begins to flash blue. When it flashes blue you can release the
button.
Enter your personal administrative code...
Push the
9-0
stored codes), and press
• If the keypad lights in green the deactivation has been
confirmed.
• If it lights red the codes weren't deactivated and you'll need to
repeat the steps again.
(the function button for deleting all codes) and
button (the function button for deactivating all
Enter
.
9
.
Enter