Changing The Password; Programming Procedure; Pages - Cardin SSB Serie Manual De Instalación Y Manual Del Usuario

The keyboard is fitted with a password that allows you to access the code memorisation and total memory
cancellation procedures. The default value is "123456". This value must be set to a different code in order
to guarantee the security of the installation.

1. Changing the password

1a Type the following sequence into the keyboard:
(for example, if you want to change the password 123456, type
1b The keyboard will sound one 3-second long beep and the green and red LEDs will
light up.
1c The red LED remains lit and the green LED flashes:
at this point type in the new password (max 6 digits) and confirm by pressing "
(for example: 112233
1d The keyboard will sound one 2-second long beep and the green and red LEDs will
light up.
The password has been modified
Attention: The password allows access to the code management functions and can be changed
as many times as required according to the needs of the system. The code should be written down
and kept in a safe place. If you lose the password you will have to send the keyboard back to the
manufacturer to be reset.

PROGRAMMING PROCEDURE

*
) .
** *
password
**
123456
17
9
4
8
#
7
0
*
*
).
ON
ON
9
4
* 8
*
"
#
7
0
*
ON
ON
D
A
3
D
A
3