Replacing Batteries; Cleaning And Care Of The Unit - Beurer BF 100 Body Complete Instrucciones Para El Uso

Connecting the scale and trans-
ferring the data
1. In the main menu, click on Data man-
ager, then "Transfer data".
2. The software will prompt you to con-
nect the control unit to the PC. To do this,
use the data transfer cable supplied.
The data is transferred to the software.
PC OK appears to let you know that the
data transfer is complete.

13 Replacing batteries

The control unit is fitted with a "change
battery" indicator. The
pears on the display if the control unit
batteries are low or the
scale batteries are low. The batteries
must then be replaced.

14 Cleaning and care of the unit

The accuracy of the measured values and
the service life of the unit depend on care-
ful handling: The unit should be cleaned
occasionally.
To clean the unit, use a damp cloth, on
which you can apply a little washing-up
liquid if required. Do not use abrasive de-
tergents and never immerse the unit in
water.
40
symbol ap-
symbol if the
Remove the USB plug from the port.
In the Weight management menu, click
on the "Weight" subfolder, from where you
can view your data in graph format, export
it (e.g. into Excel) and print it out.
The measurement results are analysed in
graph format in the "Parameters" sub-
folder.
Note:
• When changing batteries, always use
batteries of the same type, brand and
capacity.
• Always replace all batteries simulta-
neously.
• Do not use rechargeable batteries.
• Use batteries that are free of heavy
metals.
Important
• Do not use aggressive solvents or clea-
ning agents!
• Never immerse the unit in water!
• Do not wash the unit in a dishwasher!