Romus RLS160 Instrucciones De Uso página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
This manual will help you get the most from your floor machine. Read it thoroughly before operating
the machine.
This machine is intended for Commercial use. It is constructed for use in an indoor environment and
is not intended for any other use. Use only recommended accessories.
1. Switch Lever Safety Lock Button
2. Operator Handle Grips
3. Accessory Lever
4. Solution Tank
5. Accessory Power Plug
6. Handle Release Compression Lever
7. Switch Levers-
Squeeze-ON / Release-OFF
8. Operator Handle
9. Solution Fitting
WARNING! This machine contains moving parts. To reduce the risk of injury, always unplug the
power cord before serving.
INSTALLING THE BRUSH OR PAD HOLDER
Align the lugs (A) with the corresponding Slots
(B) in the brush or pad holder and turn the
brush or pad holder counter clock wise to lock
it in place. To remove brush/pad holder, give it
a quick, hard turn clockwise.
CAUTION: Using the wrong brush or pad on
this machine can damage the floor or
overload the motor.
MONOBROSSE « RLS160 »| Réf. 194460
INTRODUCTION
KNOW YOU MACHINE
8
9
GB
7

Publicidad

Tabla de contenido
loading

Productos relacionados para Romus RLS160

Este manual también es adecuado para:

194460

Tabla de contenido