Technical Specifications - Romus RLS160 Instrucciones De Uso

To keep the machine performing well for many years, please follow the following maintenance
procedures.
• Always confirm that the machine is unplugged prior to performing any maintenance or
repairs.
1. Unplug machine as soon as you are done using it.
2. Tilt machine back and remove pad driver or brush.
• Never store a low speed machine with the pad driver or brush mounted to the machine
3. Clean the outside of the machine with a mild cleaner.
4. Check power cord for any damage. If damage is detected, replace the cord immediately.
5. Lubricate wheels with a water resistant lubricant once a month.
6. Check machine for loose or missing nuts and bolts, and replace as necessary.
7. If the machine is used in a dusty environment, you may remove the motor cover and blow the
motor clean with compressed air. This will ensure proper ventilation, and allow the motor to run
cooler.
Turn off the power and unplug the machine before removing the motor cover.
Model number
Voltage
Frequence
Power
Pad/brush speed
Total weight
Protection Grade
MAINTENANCE

TECHNICAL SPECIFICATIONS

RLS160
220-240 V
1300 W
160 rpm
35,2 kg
MONOBROSSE « RLS160 »| Réf. 194460
50 Hz
IPX4
GB
9