Setting Up Your Dehumidifier; Smart Control - Ebac 3000 Serie Manual De Instrucciones

Setting up your dehumidifier for maximum performance
Location
Unless you have a particular area in need, we suggest that you place your dehumidifier in the
coldest, dampest part of the home or alternatively in a central location ensuring that safety is
paramount.
Since moisture rises, first floor location is preferable.
Place the dehumidifier away from direct heat source. As the unit uses a cold surface to collect
moisture, direct heat will reduce its ability to do so.
Doors should be kept ajar to ensure good air flow throughout the home.
Your dehumidifier will not operate should the temperature drop below 3⁰c.
Operation
Unless you have a severe problem with excess moisture or damp, we recommend plugging in the
dehumidifier and running on SMART Control (see Switching on your Dehumidifier, page 7)
Your dehumidifier should run on this setting continuously for 24-48 hours when switching on for the
first time.
It will then switch on and off automatically at the most economical times to keep the humidity at the
correct level.
In the event of needing to increase air flow and water collection, the dehumidifier can be run on
MAX for a set period of Time or Continuously.
Comfort
The compressor will make a humming noise similar to that of your fridge freezer. We recommend
that the dehumidifier is not placed directly onto a hard floor as this will increase and amplify the
sound.
To ensure that your sleep pattern is not disturbed, the dehumidifier is best suited to be located away
from your bedroom door.

Smart Control

TM
and let it do all the hard work. Ebac's patented Smart
Set your Ebac 3000 to Smart Control
TM
Control technology continuously monitors and learns about environmental factors in and around
your home so that it knows when it needs to work and when it doesn't. This reduces running time
and ensures lower running costs.
TM
Throughout this manual Smart Control will be referred to as SMART Mode.
58
GB