do not attach the
upper hooKs to glass
or plastIc!
Replacing uppeR stRap hooKs
pull
upper straps
completely out
of the bucKles.
open the
hatch
door.
close the hatch.
Pull firmly on the
straps to seat the pads.
thRead new
stRap-end bacK
into bucKle.
1033611D - 4/27
confirmed your vehicle does not require glass
pass the strap ends through
the hatch opening from
inside the vehicle.
from the door's edge.
before closIng
the hatch...
The pads must be free
from contact between
hatch door and
vehicle's frame.
while supporting the
carrier with your body,
attach the new straps to
your carrier's top straps.
hatch hooks? continue to step 13.
Keep the pads away
adjust upper straps by pulling on the ends.
OK