Apex XT Manual De Uso página 10

XT Heated Humidifier/ English
4. Operation
4.1 Operating instruction
Daily Use
1.
2.
3.
Silicon Ring
4.
Heater Plate
Switch
5.
Turn on the humidifier by pressing the On/Off switch
on the back of the humidifier platform. The
humidifier power-on indicator will illuminate (green
light).
Fill the chamber to the fill line
distilled water (approx. 450 ml).
Place the chamber on the edge of the heater plate.
Press down on the chamber (the heater plate will
give). Slide the edges on both sides of the base of
the chamber into guides on both sides of the
heater plate bay. Continue to slide the chamber into
place until the two air ports from the humidifier and
CPAP meet and the chamber is secure against the
heat plate bay of the humidifier.
Note: Make sure the water chamber is pressed up
against the heater plate switch. At this time, the
heater-on indicator will be lit to indicate the heater
plate is on.
Note: The heater will be automatically turned off
when the water chamber is removed from
the heater plate.
Connect the flexible tubing to the outlet connector
on the water chamber.
7
with