Product Description - Apex XT Manual De Uso

XT Heated Humidifier/ English

2. Product description

Baffler
Extraction Tool
Heater Plate Switch
Water Chamber:
Fill Line:
Flow Direction Indicator:
Indicator Baffler:
Extraction Baffler:
Heater Plate:
Locking Tab:
Heater Plate Switch:
Control Knob:
Heater On Indicator
(Green LED):
Abnormal Indicator (Orange
LED):
Inlet Port with Silicon Ring:
Outlet port:
AC Power Cord:
Power Socket (Inlet):
Power Jumper Cord:
Power Switch:
Flow Direction
Water Chamber
Removable Base Plate
Locking Tab
Fill Line
Heater Plate
Abnormal Indicator
The water chamber contains the water for humidification. Its
removalble base plate allows itself ease for cleaning.
Symbol indicates the maximum level of water that water chamber
can contain.
Symbol indicates the air flow direction.
The baffler can prevent water spillage due to improper shaking.
Open the water chamber for cleaning.
Warms the water in the water chamber.
Hold the CPAP in place.
When the switch is pressed against the water chamber, the heater
plate will start to work.
This control knob, graduated from 1 to 6, is used to adjust the
humidity. 1 is minimum humidify, 6 is maximum humidity.
When lit, this indicates that the heater is turned on.
When lit, this indicates that the fuse blows off.
Connect to the outlet port of the CPAP device.
Connect to the outlet port of the CPAP device.
Connects to an AC outlet providing main power to the heated
humidifier.
Connect to the AC power cord here.
Connect the heated humidifier and the CPAP device.
Turn the heated humidifier ON and OFF.
Outlet Port
Heater Platform
Power Switch
Power Socket (Inlet)
Heater ON Indicator
Control Knob
Silicon Connector
Inlet Port
Power Jumper
Cord
AC Power Cord
5