Disinfection; Servicing & Repair - Sunoptic Technologies LE-3000 Manual De Instalacion Y Uso

Cleaning Procedure
Step #1
First use compressed air (aerosol can) to remove surface dust without directly contacting
any coating the optic may have. Wiping a dusty optic with cotton swabs or lens paper is
like cleaning it with sandpaper.
Step #2
Soak with solvent a Cotton-Tipped Swabs or Lens Tissue then use a circular motion
starting from the edge of the optic moving towards the center to wipe away any dust or dirt.
Repeat as necessary; each time use a new cotton swab or lens tissue.

5. DISINFECTION

DISINFECTING THE EXPOSED TURRET ONLY
Use any disinfectant agents which are commonly applied while disinfecting surfaces of
electric medical equipment. Such disinfectant agents are usually in the form of sprays or
damp cloths.
Follow the instructions given by the manufacturer of the disinfectant solution.
6. SERVICING AND REPAIR
Defective items of equipment are to be serviced and repaired exclusively by persons
authorized by the manufacturer. All repair work shall employ original manufacturer's parts
only.
LIMITED WARRANTY
Your LE-3000 Light Engine carries a 2-year limited warranty from the date of shipment on
workmanship and all defects of material. Should your product prove to have such defects
within two years from date of shipment from Sunoptic Technologies
replace the product or component part without charge. Should your LE-3000 Light Engine
need servicing under this warranty, please contact Sunoptic Technologies
authorization documentation. You should carefully pack the unit in a sturdy carton and ship
it to the factory. Please include a note describing the defects, your name, telephone
number and a return address. Warranty does not cover equipment subject to misuse,
accidental damage, normal wear and tear or if transferred to a new owner without
authorization from Sunoptic Technologies
and you may also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
In the US:
•
FAX number:
•
Customer Service
•
LIT200 Sunoptic Technologies
(English)
This warranty gives you specific legal rights
®
877-677-2832 (toll free)
904 733-4832
904-737-7611
®
, we will repair or
®
for return
®
Rev. –
Date of Revision:05/28/13
Page 6 of 55