MEGABRAS MD-5060x Guia Del Usuario página 7

6- Fast selection of 5 kV test voltage.
7- 8 These keys (Decrease or Increase) allow the selection of the value that is
being programmed, and which is determined by the triggering of one of these
keys: *,.0
9- START. Starts the test.
:- SVT/PI. It displays the calculated value as the result of a Step Voltage Test
(SVT) or of Polarization Index (PI).
;- STOP. End of test.
<- DAI. It displays the calculated value as the result of a Dielectric Absorption
Index.
9