Installing And Removing The Lens - Ebode LughtSpeaker Guia Del Usuario

Helpful Hints

Installing and Removing the Lens:

A) Removal BEFORE your LightSpeaker
1) While holding the LightSpeaker
rotate the unit until one of the holding tabs is facing up.
2) Using a fingernail, common screwdriver or other small
flat object, gently push down and then out on the tab, easing
it out through the opening in the LightSpeaker
CAUTION: Do not touch the LED or Speaker Baffle
with the lens off when the unit is hot, allow the unit
to cool down before touching the baffle.
3) When the lens pops up, gently pry it away from
the housing, being gentle and making sure not to
break the tabs.
12
®
is installed.
®
in the palm of your hand
® housing.