Adjust The Projection Angle; Adjust The Horizontal Projection Angle; Adjust The Vertical Projection Angle; Adjust The Screen Inclination - Canon RS-CL07 Manual De Instalación

Soporte colgante de montaje en techo
Ocultar thumbs Ver también para RS-CL07:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38

Adjust the Projection Angle

Turn on the projector, project an image, and then adjust the projection angle and screen slant angle.
● After completion of adjustment, tighten the screws and check that every fitting is secured firmly.
● Be sure to hold the projector from falling until the Ceiling-mount bracket and Base bracket are secured
firmly.
Adjust the vertical projection angle.
C
Adjust the horizontal projection angle
1 Loosen two wing screws (A). Move the
projector horizontally to adjust the horizontal
projection angle.
2 When the projector is correctly positioned,
tighten the wing screw.
Adjust the vertical projection angle
1 First loosen four screws (B) and then
loosen two wing screws (C). Move the
projector vertically to adjust the vertical
projection angle.
2 When the projector is correctly positioned,
first tighten the wing screws (C) and next
tighten the four screws (B).
Adjust the screen inclination
1 Loosen four screws (D), and then adjust
the slant angle of the projector.
2 When the projector is correctly positioned,
tighten the four screws (D).
B
Adjust the horizontal projection angle.
Adjust the screen slant angle.
20°
10°
A
D


Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rs-cl10

Tabla de contenido