Brief Description; What's In The Box - SE Z5600a II Manual Del Usuario

Thank you
Thank you for choosing an sE microphone! In addition to some basic safety precautions, this manual includes details
and specifications that we hope will assist you in getting the most out of your Z5600a II. Please take a few minutes to
read through it.
Capturing great audio is our passion. We sincerely hope you'll enjoy the sound of this mic as much as we enjoyed
designing and building it for you.
Happy Tracking,
The sE Team

Brief Description

The tone quality and versatility of the Z5600a II make it an asset to any mic locker. This large-diaphragm condenser
microphone has nine switchable polar patterns, ranging from omnidirectional to cardioid to figure-8, with six additional
patterns in between. Central to the Z5600a II's rich timbre is a 12AX7 tube, delivering stunning detail and flattering the
source with enhanced harmonic character. In other words, this mic sounds huge! It has been praised for capturing
incredible vocal tones, but the Z5600a II is engineered to excel in any sonic context.
The Z5600a II is equipped with a switchable low cut filter, as well as a switchable -10dB pad, making it just as suitable
for recording a string quartet, or drum overheads, as it is for tracking vocals.
Like all of our microphones, the Z5600a II is built by hand at sE Headquarters in Shanghai. We take pride in the attention
to detail under which our products are crafted, therefore the entirety of manufacturing is done in our own facilities. We
also individually test and measure the tubes for these mics to ensure optimal performance upon arrival.

What's in the box

Your Z5600a II includes a custom flight case to safely transport the microphone and its necessary accessories. If
anything is missing, please contact your sE Electronics dealer for assistance.
Z5600a II microphone
•
8-pin microphone cable
•
Custom shockmount
•
Power supply
•
IEC power cable
•
Controls
The Z5600a II features both an Attenuation Switch and a Low-Cut Switch.
Attenuation Switch
The Attenuation Switch is located on the front-left side of the microphone. When engaged, the
incoming signal is reduced by 10dB, helping prevent signal distortion and preamplifier clipping
when capturing audio at close proximity and/or high sound pressure levels.
User Manual - EN
2