Technical Specifications - SE Z5600a II Manual Del Usuario

Technical Specifications

Capsule
Polar patterns
Frequency range
Sensitivity
Attenuation pad
Max. SPL (0.5% THD)
Equivalent noise level
Dynamic Range
Signal-to-noise ratio
Low cut filter
Electrical impedance
Recommended load impedance
Connectivity
Dimensions
Weight
Handcrafted 1" diaphragm true condenser capsule
9 (omni, cardioid, figure-8 with three additional steps between each)
20 – 20,000 Hz
25 mV/Pa (-32 dBV)
10 dB, switchable
127 / 137 dB (0/10 dB Attenuation pad)
SPL
13 dB(A)
114 / 124 dB (0/10 dB Attenuation pad)
81 dB
50 Hz, 6 dB/Oct, switchable
200 Ohms
>2k Ohms
3-pin male XLR connector
Microphone:
Diameter: 62 mm (2.44 in.)
Power Supply Unit:
186 x 157 x 81 mm (7.32 x 6.18 x 3.19 in.)
Microphone:
850 g (30.0 oz.)
Power Supply Unit:
1970 g (69.5 oz.)
Cardioid
Hypercardioid
Length: 220 mm (8.66 in.)
4