Diagnostics; Led Status Displays - Lenze L-force E94AYCET Instrucciones Para El Montaje

8

Diagnostics

LED status displays

8 Diagnostics
LED status displays
For fault diagnostics the LEDs on the front are provided for the EtherCAT module.
)
Note!
During normal operation ...
only the LEDs "MS" and "BS" should be lit constantly.
ƒ
The green LED at the RJ45 sockets X246 and X247 must be lit or blinking.
ƒ
LED
Pos. Colour
MS green
ME red
44
Condition
Description
on
The communication module is supplied with voltage and has a
connection to the standard device.
blinking
200 ms
The communication module is supplied with voltage but has no
connection to the standard device (standard device is either
switched off, in the initialisation phase, or not available).
on
An error in the communication module has occurred.
200 ms
l
E94YCET001E
EDK94AYCET DE/EN/FR/ES/IT 5.1