PRE..F1LTER CLEANING
The pre4ilter
is located
inside the dust
cup,
Check the pre-filter
frequently
and
clean when dirty.
t. Remove the dust cup as outlined in the
DUST CUP CLEANING
section.
NOTE:
Make sure dust cup is free of debris
before opening,
2. Rotate dust cup lid assembly
counter-
clockwise
as indicated
on the lid and lift off.
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
3. Clean pre-filter
by gently tapping
over a trash
container., Tap on
several sides to
ensure best
cleaning
If necessary,
rinse
with cold water
only, DO NOT use
detergent or soap,,
Allow parts to dry
24 hours before
putting back into
vacuum cleaner,
DO NOT wash in the dishwasher,
DO NOT install damp.
4, Replace the lower portion of the dust cup
by aligning marks as shown, UNLOCKED
(For Cleaning)
5. Rotate while pressing downward
until
marks align as shown, LOCKED (For Use).
6_ Replace the dust cup.
t9