Chauvet DJ COLORband 3 IRC Guía De Referencia Rápida página 3

COLORband™ 3 IRC QRG EN
Carefully unpack the COLORband™ 3 IRC and check that all the parts are in the
To Begin
package, and are in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs
of mishandling, save all the packaging and file a claim with the carrier
immediately, do not notify CHAUVET®. Failure to report damage to the carrier
immediately, or failure to have all the packaging available for inspection, could
invalidate the claim.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with CHAUVET® within 7 days of
delivery. For information on contacting CHAUVET®, see Contact Us at the end
of this QRG.
The COLORband™ 3 IRC is a full-sized LED strip light that can be a blinder, run
Description
chase effects, or wash walls with color. It has 3 zones of control, multiple built-in
programs, and DMX personalities for a variety of control options. COLORband™
3 IRCs can be mounted in groups with the CHAUVET® CBB-6 bracket, and the
COLORband™ 3 IRC can be easily transported in the CHS-60 VIP Gear bag.
Display And Menu Buttons
DMX In DMX Out
Microphone
Power Out
Power In
LEDs Zone 3
LEDs
Zone 2
LEDs
Overview
Zone 1
L-Brackets/
Floor Supports
L-Brackets/
Floor Supports
COLORband™ 3 IRC has an auto-ranging power supply that works with a
AC Power
voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
Power linking is when products are daisy chained together through their
Power In and Power Out sockets, so that many products can be powered from
one outlet. For the maximum number of COLORband™ 3 IRCs that can be
power linked at 120 V or at 240 V, see the User Manual or the label on the
product. The User Manual is available at the CHAUVET® website:
http://www.chauvetlighting.com/product-manuals-literature/.
Fuse Replacement 1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
3