How To Use - HoMedics TotalClean AP-25 Manual De Instrucciones E Información Sobre La Garantia

HOW TO USE

Before Turning the Unit On
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the Carbon Odor Filter inside the box and remove the protective plastic bag.
• Install the Carbon Odor Filter and make sure the True HEPA Filter is firmly in place.
1. Open the back grille by pulling on the tabs on
either side of the top of the grille cover.
2. Open the cover outward until the tabs at the
bottom of the grille cover easily slide away from
the unit.
3. The top of the Carbon Odor Filter has 2 slots for
installation. Hang the Carbon Odor Filter on the
top tabs on the inside of the grille cover and
secure under the bottom tabs.
6
HOW TO USE
ON/OFF AND FAN SPEED SETTINGS
• To turn the air purifier on, press the ON/OFF
and fan speed indicator will illuminate and the air purifier will start to operate.
• To activate NIGHT MODE and turn the air purifier display lights off, press the ON/OFF
second time
NOTE: Night mode can only be activated when the air purifier is powered on.
• To turn the air purifier off, Press the ON/OFF
• This air purifier has 3 fan speed settings: LOW (1), MEDIUM (2), and HIGH (3). The higher the fan
speed setting, the faster the air will be purified. To select or change fan speed, press the FAN SPEED
button until desired speed is reached.
4. The True HEPA Filter will be resting inside the
unit. Make sure the filter is firmly seated inside
the unit with the Air Flow arrows pointing toward
the inside of the air purifier.
5. Place the tabs at the bottom of the grille cover
into the base of the unit. Gently push the grille
cover back into place until you hear a click sound
indicating that the grille is firmly latched. Plug
the power cord into a standard AC outlet.
button. When the air purifier is on, the ON/OFF button
button a
button a third time.
7