Bosch GKS18V-25GC Instrucciones De Funcionamiento Y Seguridad página 24

1600A01UV3.qxp_GKS18-25 4/27/20 8:12 AM Page 24
MITER GUIDE
The miter guide 43 (sold separately) can be
used to precisely position a track from 60°
left to 45° right.
The miter guide must be positioned at the
front end of track.
A. Loosen the knob 48 on the bottom of
the miter guide (Fig. 22).
B. Follow instructions in "Connecting
Multiple Tracks" to attach the miter
guide to the desired track using
connector 41.
C. Use the fence 47 to set the desired
angle. As the fence is moved, the
indicator 46 shows the angle (Fig. 23).
D. Once the desired angle is set, tighten
the knob 48 on the bottom of the miter
guide to hold it at that angle (Fig. 24).
E. Position the fence and connected track
such that the fence rests against the
workpiece.
F. Once the miter guide and connected
track have been positioned as desired,
secure the miter guide and connected
track in place (refer to "Securing
Tracks").
24
Track Assembly
Fig. 22
Fig. 23
Fig. 24
47
43
48
47
46
43
48