Charge Your Gear; Smart Charge Sequence; Flashlight - Goalzero Venture 30 Guía De Usuario

CHARGE YOUR GEAR

Venture 30 is designed to charge POV cameras, phones, tablets, and other USB-powered devices.
Headlamp POV Camera Phone Tablet
5-10x 5x 2-3x
1. Using your charging cable, plug into
Venture 30's USB ports – they'll both
work at the same time at 2.4A so you can
share power with a buddy.
2. If your device charges from micro USB,
use the built-in cable.
3. The blue indicator lights will flash
according to how quickly your gear is
charging. A slow flash indicates a slow
charge, while quicker flashing indicates
faster charging. If you're experiencing
slow charge times, run the smart charge
sequence (see next section) and ensure
Venture 30 is fully charged.
4
7"
1x

SMART CHARGE SEQUENCE

Venture 30's advanced smart charging
feature allows you to optimize and adapt its
USB outputs to charge your gear as fast as
possible. This sequence runs independently
for both USB ports – meaning you can set
different charging profiles for each port.
Fastest profiles will be applied and saved
until reset or the sequence is run again.
1. With your gear plugged into Venture 30's
USB port, press and hold the Battery
button for approximately 5 seconds to
activate the smart charge sequence.
2. The blue indicator lights will begin
to flash as different profiles are
automatically tested with your gear.
3. When the lights finish flashing, the
fastest profile has been selected.
Battery Button

FLASHLIGHT

Venture 30 comes with a built-in 65 lumen
flashlight with three settings:
high, low, and strobe.
TURN ON/OFF
Press the Flashlight button to turn on the
65 lumen flashlight.
Flashlight
HOW IT WORKS: You might have noticed if you plug
your device into a charger claiming a high output your
device still charges slowly. How quickly your device
charges comes down to communication between the
charger and what you plug in. Every device has its own
preference when it comes to charging, the challenge
is identifying the language used by the manufacturer
to decode that preference. Venture 30's smart
charging feature acts as a translator, identifying your
device's language, decoding and applying the fastest
charging profile possible, without overcharging or
overheating. This feature makes Venture 30 one of
the most compatible chargers on the market.
We recommend running the smart charge sequence
anytime you experience slow charge times or when
plugging in new gear.
Blue Indicator Lights
FLASHLIGHT SETTINGS
1. Press and hold the Flashlight button for
approximately 5 seconds – all the lights
will flash once indicating you've entered
flashlight selection mode.
2. With the Flashlight button still held
down, press the Battery button to cycle
through 5 light modes.
Whichever mode you are in when you release
the Flashlight button will become the default
mode. Avoid looking into the light when you
turn it on – it's pretty dang bright.
Flashlight Button
5