Bosch GAA12V-21 Instrucciones De Funcionamiento Y Seguridad página 6

2610052951.qxp_GAA12V-21 6/24/19 9:09 AM Page 6
USB power port, press the "USB ON"
button for 3 seconds.
When pressed, the USB port will
determine if a device is plugged in. If so,
the USB port will remain on as long as
the device is attached for a maximum of
2 hours. If after 60 seconds, the port
does not detect a device initially
connected, it will deactivate, or go to
sleep, conserving battery power.
The portable power adapter can be
placed within the portable power
adapter pocket or can be attached to
the user's belt with the convenient belt
clip.
▶ Connecting the Heated
Jacket Power Cable
element power cable to the heating
element power port of the portable
power adapter. Connecting any other
the portable power adapter and
remove the battery pack before
performing any maintenance. Never
disassemble the battery pack or
portable power adapter. Contact a
Bosch service facility for all repairs.
Keep the portable power adapter,
battery and charger clean at all times.
Operating Instructions
Connect only Bosch
heated jacket heating
Maintenance
To reduce the risk of
injury, always unplug
device may create a risk of fire or
personal injury.
1. Plug the heated jacket power cable
into the heated jacket power port
of the portable power adapter.
2. Press the power button and heat
level controller of the heated jacket
once for each heat level.
3. Slide the portable power adapter
into the pocket provided in the
garment or hang the portable
power adapter on your belt using
the belt clip.
Do not immerse the portable power
adapter, battery and charger into water
or other fluids.
Wipe off debris using a moist and soft
cloth. Do not use any cleaning agents
or solvents.
The battery is not serviceable and
should be repaired by an authorized
service center.
-6-