Child Safety Seats
3.
If the seat belt retained child safety seat
has an upper tether, attach it to the back
of the seat (see
Straps
on page 34).
Installing ISOFIX Child Seats
Lower ISOFIX anchors are provided in the
second row outboard seats and in both rear
row seats. The anchors are located between
the seat's back rest and rear cushion. The
exact location of each anchor is identified by a
child safety seat identification button,
illustrated below. The button is located on the
seat back, directly above its associated
anchor.
Monopost Seats:
32
Attaching Upper Tether
Bench Seats:
In the second row, install ISOFIX child safety
seats in the outboard seating positions only.
Use only a seat belt retained seat in the center
position.
Note: If Model X is equipped with two seats in
the second row, both seats support the use of
ISOFIX child safety seats.
Monopost Seats:
Model X Owner's Manual