Especificaciones - Tripp-Lite B114-004-R Manual De Usuario

1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase.
TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service
center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment
which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of
software, loss of data, costs of substitutes, claims by third parties, or otherwise.
The policy of TRIPP LITE is one of continuous improvement. Specifications are subject to change without notice.
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a
chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Radio/TV Interference Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any
changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
Made in China.
Manual de usuario
Divisor de vídeo
(4 y 2 puertos)
Modelo #: B114-004-R, B114-002-R
NOTA: Siga estos procedimientos de instalación y operación para garantizar el rendimiento
correcto y evitar daños a esta unidad o a los dispositivos conectados.
Derechos reservados © 2008 Tripp Lite. Todos los derechos reservados. Todas las marcas registradas son propiedad de sus respectivos
Introducción
El divisor de vídeo es un impulsador y divisor de
señal que toma la entrada de vídeo de una sola fuente
y la dirige a varias salidas de vídeo para pantallas
que usan señales análogas. Aumenta la distancia para
el envío de la señal hasta los 64 m (210 pies).
Características:
• Una entrada de vídeo a varias salidas de vídeo
• Distancia de transmisión de hasta 64 m (210 pies)

especificaciones

Suministro de energía
Longitud máxima del cable
Tipo de señal
propietarios. Las especificaciones técnicas pueden cambiar sin notificación.
9 voltios de CC y 0.8A
64 m (210 pies)
Pantallas VGA/SVGA/XGA/UXGA/Multisincrónicas
Tripp Lite Oficinas principales
(773) 869-1234, www.tripplite.com
• Adecuado para monitores VGA/SVGA/XGA/
UXGA y Multisync
• Unidades múltiples en cascada para aumentar la
cantidad de salidas
• Compatible con un ancho de banda de 350 MHz
NOTA IMPORTANTE: Esta unidad no está
diseñada para pantallas CGA, EGA o
MONOCROMATICAS o para pantallas que usan
una señal de vídeo digital.
1111 W. 35th Street,
Chicago, IL 60609 USA