Technical Data; Noise/Vibration Information; Battery Charging - Bosch Professional GDE 18V-26 D Manual Original

(1) Dust cap for SDS plus quick-change chuck for
drilling diameters of up to 16 mm
(2) Dust cap for SDS plus quick-change chuck for
drilling diameters of up to 26 mm
(3) Dust cap for SDS plus fixed chuck for drilling dia-
meters of up to 16 mm
(4) Dust cap for SDS plus fixed chuck for drilling dia-
meters of up to 26 mm
(5) Locking tab
(6) Locking receptacle
(7) Auxiliary handle
(8) Clamping ring
(9) Mounting bracket
(10) Guide pins
(11) Stabilising brackets
(12) Battery
On/off switch
(13)
(14) Viewing window
(15) Release button for dust box
(16) Button for drill bit length adjustment
(17) Guide with depth stop scale
(18) Button for drilling depth adjustment
(19) Extension
(20) Battery release button
(21) Assembly openings for stabilising brackets
(22) Locking button
(23) Dust box
A)
(25) HEPA filter
(23) Locking tab of the HEPA filter
A) The HEPA filter removes 99.97% of all particles larger than
0.3 micrometres.

Technical Data

Dust extraction attachment
Article number
A)
Drilling diameter
B)
max. drill bit length
Max. drilling depth
Weight according to EPTA-
C)
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
D)
ure during operation and
during storage
Recommended batteries
Bosch Power Tools
Dust extraction attachment
Recommended chargers
A) with dust cap (1) or (3) for drilling diameters of up to 16 mm,
B) with dust cap extension
C) Depends on battery in use
D) Limited performance at temperatures <0 °C

Noise/Vibration Information

GDE 18V-26 D
Noise emission values determined according to
EN 60335-2-69.
Typically, the A-weighted sound pressure level of the dust
extraction attachment is 78 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed the declared val-
ues.
Wear hearing protection!
GDE 18V-26 D + GBH 2-26
Noise emission values determined according to EN
60745-2-6.
Typically the A-weighted noise level of the power tool are: 93
dB(A); sound power level 104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-6: a
K = 1.5 m/s
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
GDE 18V-26 D
antly increase the exposure to vibration over the total work-
1 600 A01 W0H ing period.
1 600 A02 05M
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
mm 4−26
tually being used should also be taken into account. This can
mm 265
significantly reduce the exposure to vibration over the total
mm 100
working period.
kg 2.2−3.2
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
°C 0 to +35
and organising workflows correctly.
°C –20 to +50
Assembly

Battery Charging

GBA 18V...
ProCORE18V...
u
with dust cap (2) or (4) for drilling diameters of 16−26 mm
(triax vector sum) and uncertainty K
h
2
.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 575 | (10.01.2020)
English | 13
GDE 18V-26 D
GAL 18...
GAX 18...
GAL 36...
2
< 13 m/s ,
h